Description
Quantity
Unit Price
Extended Price
SUBTOTAL: $0.00

Eaton 9SX 1000VA 900W 208V Online Double-Conversion UPS - 6 C13 Outlets, Cybersecure Network Card Option, Extended Run, Tower

Eaton Corporation
9SX1000G
743172091284
Product Overview
  • Tower
  • 5.90 Minute Stand-by
  • 230 V AC Input
  • 200 V AC, 208 V AC, 220 V AC, 230 V AC, 240 V AC Output
  • 6 x IEC 60320 C13

Double-Conversion UPS Protects Equipment Against Damage, Downtime and Data Loss

This 9SX on-line double-conversion UPS system maintains perfect output by converting AC input to DC, then reconverting UPS output to fully regulated sine wave AC. Featuring surge suppression, true on-line operation with pure sine wave output and zero transfer time between on-line and battery modes, the 9SX1000G provides the highest level of AC power protection and battery backup for medical, light industrial, automation and other mission-critical IT applications where space is limited, but premium power reliability is essential.

Reliable, Expandable Battery Backup Keeps You Operational Through Power Outages

The field-replaceable, hot-swappable internal battery modules allow you to work through short power failures and give you enough time to safely save files and shut down your system in case of a prolonged blackout. Exclusive ABM technology increases battery life by 50 percent and closely monitors battery health to provide advanced notice when batteries need replacing. You can also connect up to four external battery modules (9SXEBM36, sold separately) for hours of extended runtime.

Optional Gigabit Network Interface Offers 24/7 Remote Access

The NETWORK-M2 network card (sold separately) enables full remote configuration and management, including load shedding, reboots of connected equipment and safe shutdowns. UPS firmware can also be flashed remotely through the NETWORK-M2 without dropping the load, so you don't have to plan for downtime. The card meets both UL 2900-1 and IEC 62443-4-2 standards for cybersecurity, which were developed to address the vulnerability of connected devices to known malware/exploits and to protect business from these risks. An optional Environmental Monitoring Probe Gen 2 (EMPDT1H1C2, sold separately) provides a variety of environmental monitoring capabilities, including temperature and humidity conditions.

C13 Outlets Protect Your Connected Components

Six C13 outlets provide connected equipment with pure sine wave AC output and allow you to monitor power consumption down to the outlet group level. Power provided by these outlets is filtered to protect connected equipment against damaging surges and line noise. Three outlets are grouped into two load banks that let you shed non-critical loads to extend runtime for critical loads.

ManufacturerEaton Corporation
Manufacturer Part Number9SX1000G
Manufacturer Website Addresshttp://www.eaton.com
Brand NameEaton
Product Name1000VA Tower UPS
Marketing Information

Double-Conversion UPS Protects Equipment Against Damage, Downtime and Data Loss

This 9SX on-line double-conversion UPS system maintains perfect output by converting AC input to DC, then reconverting UPS output to fully regulated sine wave AC. Featuring surge suppression, true on-line operation with pure sine wave output and zero transfer time between on-line and battery modes, the 9SX1000G provides the highest level of AC power protection and battery backup for medical, light industrial, automation and other mission-critical IT applications where space is limited, but premium power reliability is essential.

Reliable, Expandable Battery Backup Keeps You Operational Through Power Outages

The field-replaceable, hot-swappable internal battery modules allow you to work through short power failures and give you enough time to safely save files and shut down your system in case of a prolonged blackout. Exclusive ABM technology increases battery life by 50 percent and closely monitors battery health to provide advanced notice when batteries need replacing. You can also connect up to four external battery modules (9SXEBM36, sold separately) for hours of extended runtime.

Optional Gigabit Network Interface Offers 24/7 Remote Access

The NETWORK-M2 network card (sold separately) enables full remote configuration and management, including load shedding, reboots of connected equipment and safe shutdowns. UPS firmware can also be flashed remotely through the NETWORK-M2 without dropping the load, so you don't have to plan for downtime. The card meets both UL 2900-1 and IEC 62443-4-2 standards for cybersecurity, which were developed to address the vulnerability of connected devices to known malware/exploits and to protect business from these risks. An optional Environmental Monitoring Probe Gen 2 (EMPDT1H1C2, sold separately) provides a variety of environmental monitoring capabilities, including temperature and humidity conditions.

C13 Outlets Protect Your Connected Components

Six C13 outlets provide connected equipment with pure sine wave AC output and allow you to monitor power consumption down to the outlet group level. Power provided by these outlets is filtered to protect connected equipment against damaging surges and line noise. Three outlets are grouped into two load banks that let you shed non-critical loads to extend runtime for critical loads.

Product TypeDouble Conversion Online UPS
Plug/Connector TypeIEC 60320 C14
Receptacle TypeIEC 60320 C13
Receptacle Detail6 x IEC 60320 C13
Application/UsageIT System
Application/UsageIndustrial Automation System
Application/UsageIndustrial Equipment
Input Voltage230 V AC
Input Voltage Range190 V AC - 276 V AC
Output Voltage230 V AC
Output Voltage240 V AC
Output Voltage220 V AC
Output Voltage208 V AC
Output Voltage200 V AC
Waveform TypeSine Wave
Backup/Run Time (Full Load)5.90 Minute
Form FactorTower
Weight (Approximate)30.90 lb
Package Contents
  • 1000VA Tower UPS
  • Manual
  • Quick Start Guide
  • Safety Guide
  • Serial And USB Cables
Country of OriginPhilippines
Limited Warranty3 Year
General Information
ManufacturerEaton Corporation
Manufacturer Part Number9SX1000G
Manufacturer Website Addresshttp://www.eaton.com
Brand NameEaton
Product Name1000VA Tower UPS
Marketing Information

Double-Conversion UPS Protects Equipment Against Damage, Downtime and Data Loss

This 9SX on-line double-conversion UPS system maintains perfect output by converting AC input to DC, then reconverting UPS output to fully regulated sine wave AC. Featuring surge suppression, true on-line operation with pure sine wave output and zero transfer time between on-line and battery modes, the 9SX1000G provides the highest level of AC power protection and battery backup for medical, light industrial, automation and other mission-critical IT applications where space is limited, but premium power reliability is essential.

Reliable, Expandable Battery Backup Keeps You Operational Through Power Outages

The field-replaceable, hot-swappable internal battery modules allow you to work through short power failures and give you enough time to safely save files and shut down your system in case of a prolonged blackout. Exclusive ABM technology increases battery life by 50 percent and closely monitors battery health to provide advanced notice when batteries need replacing. You can also connect up to four external battery modules (9SXEBM36, sold separately) for hours of extended runtime.

Optional Gigabit Network Interface Offers 24/7 Remote Access

The NETWORK-M2 network card (sold separately) enables full remote configuration and management, including load shedding, reboots of connected equipment and safe shutdowns. UPS firmware can also be flashed remotely through the NETWORK-M2 without dropping the load, so you don't have to plan for downtime. The card meets both UL 2900-1 and IEC 62443-4-2 standards for cybersecurity, which were developed to address the vulnerability of connected devices to known malware/exploits and to protect business from these risks. An optional Environmental Monitoring Probe Gen 2 (EMPDT1H1C2, sold separately) provides a variety of environmental monitoring capabilities, including temperature and humidity conditions.

C13 Outlets Protect Your Connected Components

Six C13 outlets provide connected equipment with pure sine wave AC output and allow you to monitor power consumption down to the outlet group level. Power provided by these outlets is filtered to protect connected equipment against damaging surges and line noise. Three outlets are grouped into two load banks that let you shed non-critical loads to extend runtime for critical loads.

Product TypeDouble Conversion Online UPS
Technical Information
Plug/Connector TypeIEC 60320 C14
Receptacle TypeIEC 60320 C13
Receptacle Detail6 x IEC 60320 C13
Application/UsageIndustrial Equipment
Application/UsageIndustrial Automation System
Application/UsageIT System
Power Description
Input Voltage230 V AC
Input Voltage Range190 V AC - 276 V AC
Output Voltage200 V AC
Output Voltage208 V AC
Output Voltage230 V AC
Output Voltage220 V AC
Output Voltage240 V AC
Waveform TypeSine Wave
Battery Information
Backup/Run Time (Full Load)5.90 Minute
Physical Characteristics
Form FactorTower
Weight (Approximate)30.90 lb
Miscellaneous
Package Contents
  • 1000VA Tower UPS
  • Manual
  • Quick Start Guide
  • Safety Guide
  • Serial And USB Cables
Country of OriginPhilippines
Warranty
Limited Warranty3 Year

$ 1,534.00
Quantity:
Add
Shipping Information
Weight 30.90 lb
Quick Links
Company Info

Pathway Communications Group

NEW JERSEY LOCATION
301 Route 17 North
Suite 800
Rutherford, NJ 07070

TENESSEE LOCATION
320 Seven Spring Way
Suite 250
Brentwood, TN 37027

Sign up now
Connect With


Call Us
Sales: 201-468-8950
Service: 201-468-8951
201-210-2430
Copyright © 2024 Pathway Communications Group All rights reserved.
All other trademarks are the property of their respective owners.
</body> </html> <!--t_=1.241--> <!-- H=NET-WF325 3/28/2024 10:05:00 AM -->